Windows
XP
• Configure
Windows XP to connect to the
Internet
Windows
2000
• Using
the Internet Connection Wizard
v5
• Setting
up Dial-up Networking manually
• Using
the Cybernet Wizard
Windows
ME
• Using
the Internet Connection Wizard
v5
• Setting
up Dial-up Networking manually
• Using
the Cybernet Wizard
Windows
98
• Using
the Internet Connection Wizard
v5
• Using
the Internet Connection Wizard
v4
• Setting
up Dial-up Networking manually
• Using
the Cybernet Wizard
Windows
NT
• Using
the Internet Connection Wizard
v5
• Using
the Internet Connection Wizard
v4
• Setting
up Dial-up Networking manually
• Using
the Cybernet Wizard
Windows
95
• Using
the Internet Connection Wizard
v5
• Using
the Internet Connection Wizard
v4
• Setting
up Dial-up Networking manually
• Using
the Cybernet Wizard
Windows
Technical Issues
• Dial-Up
Networking could not negotiate
a compatible set of network
protocols
you
specified in the Server Type
settings. Check
your network configuration
in the control Panel then try
connecting again.
• Error
629: The port was disconnected
by the remote machine.
• Error
630: The port was disconnected
due to hardware failure.
• Error
645: Internal authentication
error.
• Error
650: The Remote Access server
is not responding.
• Error
676: The line is busy
• Error
678: The computer you are dialing
is not answering. Try again
later.
• Error
691: Access denied username/password
is invalid on the domain.
• Error
718: PPP time out
• I
can connect to Mycybernet, but
can't browse any webpages.
• The
computer you are dialing into
cannot establish a DUN connection,
check
your password and try again.
• The
Microsoft dial-up adapter is
not installed or working properly.
• The
modem is being used by another
dial-up networking connection
or another
program. Disconnect the other
connection or close the program,
and
then try again.
• Unable
to open communications port
or port already in use.
• You
have been disconnected from
the computer you dialed. Double-click
the
connection to try again.
